If you are watching a fetal monitor during labor, the line that shows contractions is the one labeled TOCO (tocodynamometer). It appears as a bell-shaped curve that rises and falls, and it sits on a different track from the line showing your baby’s heart rate. The baby’s heart rate is the other main line, usually labeled FHR or marked in beats per minute.
Those two lines tell two different stories at the same time. One tracks how hard and how often your uterus is squeezing. The other tracks how your baby is handling those squeezes. Knowing which is which helps you follow what the nurses and doctors are watching.
Which Line On Monitor Is Contractions?
The contraction line is the one that looks like rolling hills. It climbs as the uterus tightens, reaches a peak, then slides back down as the muscle relaxes. On most hospital monitors this channel is labeled TOCO, and the unit of measurement is mmHg (millimeters of mercury).
The other prominent line is the fetal heart rate. It moves faster and looks more jagged, because a baby’s heart beats many times per minute. The FHR channel is usually labeled in beats per minute (bpm) and often appears at the top of the screen or in a different color.
So the simple rule: the smooth hill-shaped line is contractions. The faster, spikier line is your baby’s heartbeat.
One non-obvious point. The TOCO line does not measure the actual strength of your contraction in a precise way. It measures how much the uterus pushes against a button held on your belly by a belt. That is a change in shape, not a true pressure reading. A separate internal device called an IUPC (intrauterine pressure catheter) can measure actual pressure inside the uterus, but it is used only in specific situations and is not routine.
What Do the Numbers and Labels On a Fetal Monitor Mean?
Most monitors show several pieces of information at once. Reading the labels first makes the screen far less confusing.
- TOCO — the contraction channel. The curve rises with each contraction.
- FHR — fetal heart rate, in beats per minute. Normal baseline is generally considered 110 to 160 bpm.
- UA — sometimes used for uterine activity, another name for the contraction channel.
- mmHg — the unit on the contraction scale. It reflects relative change, not true internal pressure.
The fetal heart rate baseline is the average rate when the baby is not being squeezed. A normal baseline is generally considered 110 to 160 bpm. Nurses also watch how the rate changes with contractions, because those patterns carry information about how the baby is tolerating labor.
The contraction channel often has its own scale along the side. The peak of each hill lines up with the moment your uterus is tightest. The flat space between hills is the resting period, when blood flow to the placenta recovers.
Contraction Line vs. Baby’s Heart Rate Line: Side-by-Side Comparison
The two channels are easy to tell apart once you know what each one is doing.
| Feature | Contraction line (TOCO) | Fetal heart rate line (FHR) |
|---|---|---|
| What it tracks | Uterine tightening and relaxing | Baby’s heartbeat |
| Shape | Smooth hills, rise and fall | Faster, jagged, continuous |
| Typical label | TOCO or UA | FHR |
| Unit | mmHg (relative change) | Beats per minute (bpm) |
| Typical normal range | No fixed number; pattern matters | Baseline generally 110-160 bpm |
| How it is measured | External belt and pressure button | Ultrasound or scalp electrode |
Notice that the contraction line has no single “normal” number. What matters is the pattern over time: how often contractions come, how long they last, and how much rest the uterus gets between them.
How Often Should Contractions Show Up On the Monitor?
Contraction frequency is counted from the start of one contraction to the start of the next. In active labor, contractions commonly come every few minutes and last under a minute, but the exact pattern varies widely from person to person.
What clinicians watch for is whether the uterus gets enough rest between contractions. When contractions come very close together with little recovery time, the placenta has less chance to re-oxygenate the baby. That is one reason the resting space between hills matters as much as the hills themselves.
Some monitors also print a number for contraction frequency and duration, but the shape of the curve is what the team reads most closely. A contraction that peaks and returns to a flat baseline is doing its job. A curve that never fully returns to rest is a pattern worth flagging.
The word “strong” on a monitor does not always match what you feel. The TOCO reading reflects how the belt senses the uterus, not your personal experience of pain. Some people feel intense contractions with modest monitor readings, and the reverse happens too.
What Does a Normal Contraction Pattern Look Like?
A normal contraction pattern has three features: regular spacing, a clear peak, and a full return to baseline between contractions. On the screen this looks like a series of evenly spaced hills with flat valleys in between.
As labor progresses, contractions typically get closer together, last a bit longer, and feel stronger. The monitor hills often grow taller as well, though the height on a TOCO channel is only a rough guide to intensity.
When the pattern changes in a way that worries the care team, they usually look at the fetal heart rate line at the same time. The two channels are read together, never in isolation. A contraction pattern that is fine on its own can still matter if the baby’s heart rate responds poorly to it.
Why Do Doctors Watch Both Lines Together?
Each contraction briefly reduces blood flow to the placenta. A healthy baby handles this well, and the heart rate stays steady or dips slightly then recovers. Watching the FHR line during and after each contraction shows how the baby is coping.
This is why the two lines are printed on the same strip, lined up in time. When a contraction peak appears on the top channel, the team looks at what the heart rate line does right after it. The timing between the two is the whole point.
Certain heart rate patterns are considered reassuring and others are not, based on established fetal monitoring guidelines. The details are complex, and interpretation is a job for trained clinicians. The value for you as a parent is simpler: you can now tell which line is which, so you can follow the conversation.
Can You Read the Monitor Yourself During Labor?
You can learn to identify the two main lines, and that alone makes the screen less mysterious. The contraction line is the smooth one that rises and falls. The heart rate line is the faster, busier one.
What you should not do is try to interpret the fetal heart rate pattern on your own. Reading those tracings requires training and context, and a single glance at the screen does not tell the full story. If something concerns you, ask your nurse or doctor directly. That is what they are there for.
Some people find it calming to watch the contraction line and breathe through each hill. Others prefer the monitor turned so they cannot see it. Both approaches are reasonable.
Frequently Asked Questions
Which line on the monitor shows contractions?
The contraction line is the one labeled TOCO or UA, and it looks like smooth hills that rise and fall. It is the channel that tracks uterine tightening, separate from the baby’s heart rate line.
What is a normal fetal heart rate on the monitor?
A normal baseline fetal heart rate is generally considered 110 to 160 beats per minute. Your care team also watches how the rate changes with each contraction, not just the baseline number.
Does the TOCO line measure how strong my contractions are?
No, the TOCO line shows relative change in uterine shape, not true internal pressure. It gives a rough sense of timing and intensity but is not a precise strength measurement.
Why are there two lines on a fetal monitor?
One line tracks your contractions and the other tracks your baby’s heart rate. Reading them together shows how your baby responds to each contraction, which is the main reason both are recorded at once.

