If you are writing up a study, a class paper, or a journal submission, the p value is one of the easiest things to get wrong on the page. APA style has clear rules for how p values should look in text, in tables, and in figures. The core rule is simple: report the exact p value to two or three decimal places, use a lowercase italic p, and drop the leading zero for values that cannot equal 1.
So a result might read p = .03, not p = 0.03 and not p = .0300. When a value is very small, APA allows a threshold statement such as p < .001 rather than a string of zeros. These rules apply to the number itself, and they sit alongside separate rules for how you describe what the number means.
How To Report P Values Formatting Rules And Apa Style?
The formatting rules are mechanical and consistent across most journals that follow APA. The statistical reporting rules are about honesty and completeness. Both matter, and they are not the same thing.
The formatting basics:
- Use a lowercase italic p. Not a capital P, not a roman p.
- Report the exact value to two or three decimal places: p = .042.
- Drop the leading zero. Write .042, not 0.042. This applies to correlations and other statistics that cannot exceed 1, but not to means or standard deviations.
- Use p < .001 when the value rounds to zero at your chosen decimal places.
- Do not write p = .000. A p value is a probability and can never be exactly zero.
- Keep the same number of decimal places within a single set of results for consistency.
A typical sentence looks like this: “The difference between groups was statistically significant, t(48) = 2.31, p = .025.” The test statistic, degrees of freedom, and p value travel together. Omitting any of them leaves the reader unable to check your work.
One clarification that trips up a lot of writers: the leading-zero rule is about the type of statistic, not about the p value specifically. Statistics that are bounded between 0 and 1 — p values, correlations, proportions, beta weights in some conventions — drop the zero. Statistics that are not bounded that way, like means and standard deviations, keep it. So you write M = 0.75 but r = .75. Same number, different rule, because the two statistics have different possible ranges.
What Does The P Value Actually Tell You?
A p value is the probability of getting a result at least as extreme as the one you observed, assuming the null hypothesis is true. That is the whole definition. It is not the probability that the null hypothesis is true, and it is not the probability that your result happened by chance alone.
This distinction is not pedantic. It is the single most common misinterpretation in published research and in the way results get described in the media. When a study reports p = .03, it is saying: if there were truly no effect, you would see a result this large or larger about 3 times in 100. It is not saying there is a 3 percent chance the finding is a fluke.
The threshold of .05 is a convention, not a law of nature. It was popularized in the early twentieth century as a rough cutoff for flagging results worth a second look. Nothing about the number .05 makes a result at p = .049 real and a result at p = .051 fake. The two are functionally the same. Treating them as different is a well-documented problem in research reporting.
Because of this, many statisticians and journal editors now push for reporting the exact p value rather than a bare “significant” or “not significant.” The exact number lets readers judge for themselves. The label hides information.
How Do You Report P Values In Tables And Figures?
Tables and figures have their own conventions, and mixing them up is a common source of copyediting errors.
In a table, you typically place the p value in its own column, headed with an italic p. Report exact values where space allows. Many journals allow asterisks as a shorthand, with a note explaining what each symbol means. A common scheme uses one asterisk for p < .05, two for p < .01, and three for p < .001. If you use asterisks, you must define them in the table note. An undefined asterisk is meaningless to the reader.
In figures, p values are usually shown as annotations near the comparison they describe, or in the figure caption. Keep the formatting identical to the text: italic lowercase p, no leading zero, consistent decimals.
One practical point: if your table already reports exact p values, you generally do not also need asterisks. Using both is redundant and can confuse readers who wonder whether the asterisk means something different from the number.
What Is The Difference Between P Values And Effect Sizes?
This is where a lot of reporting goes wrong. A p value tells you whether an effect is likely to be detectable given your sample. It tells you nothing about how large the effect is or whether it matters in practice.
A very large sample can produce a tiny, trivial effect that is statistically significant. A very small sample can miss a large, important effect and report a non-significant p value. The p value alone cannot distinguish these situations.
That is why current reporting standards increasingly ask for effect sizes alongside p values. Effect size measures — such as Cohen’s d, odds ratios, or correlation coefficients — describe the magnitude of a finding in a way the p value cannot. Confidence intervals do similar work by showing a range of plausible values for the effect.
A complete results sentence often looks like this: “The intervention group scored higher than the control group, t(98) = 2.14, p = .035, d = 0.43.” The p value says the difference is unlikely to be a chance artifact. The effect size says the difference is modest. Both pieces of information are needed to interpret the finding honestly.
Common P Value Reporting Mistakes To Avoid
Most errors fall into a small number of categories. Knowing them in advance saves revision rounds.
- Writing p = 0.05 instead of p = .05. The leading zero is wrong for p values.
- Writing p = .000. Use p < .001 instead.
- Reporting “p < .05” when you have the exact value. Report the exact value unless it is below your reporting threshold.
- Using a capital P or failing to italicize the p.
- Describing a non-significant result as “proving no effect.” A non-significant p value means the data did not provide enough evidence to reject the null. It does not prove the null is true.
- Calling a result “highly significant” based on a small p value. The size of the p value is not a measure of importance.
- Mixing decimal places inconsistently across a table or paragraph.
One more that is easy to miss: if you report a p value in the abstract, it should match the value in the body of the paper exactly. Discrepancies between abstract and results section are a common reason papers get flagged in review.
Does APA Style Require Exact P Values?
Current APA guidance favors reporting exact p values to two or three decimal places rather than relying on threshold statements. The exception is very small values, where p < .001 is the accepted shorthand.
This reflects a broader shift in research reporting. Exact values carry more information than a binary significant/not-significant label, and they let readers apply their own judgment. Some journals still accept the older convention of reporting only whether a result fell above or below .05, but this is increasingly discouraged.
If you are unsure which convention your target journal wants, check its author guidelines. When in doubt, report the exact value. It is almost never wrong to give more precise information, and it is frequently wrong to give less.
Frequently Asked Questions
Do you put a zero before a p value in APA style?
No. APA style says to drop the leading zero for statistics that cannot exceed 1, including p values. Write p = .04, not p = 0.04.
How many decimal places should a p value have?
Two or three decimal places is standard, and you should stay consistent within a set of results. Use p < .001 when the value rounds to zero at your chosen precision.
Can you write p = .000 in APA style?
No. A p value is a probability and cannot be exactly zero. Report p < .001 instead when the value is smaller than your reporting threshold.
Should a p value be italicized?
Yes. The p is italicized and lowercase in APA style. The number that follows it is not italicized.

