Most dental fillings will not stop you from getting an MRI. The metal used in modern fillings is generally not magnetic, so it does not get pulled by the scanner and does not heat up in a way that causes harm. The bigger issue is not safety at all — it is that some fillings can blur or distort the pictures of your head and neck.
That distinction matters. Safety and image quality are two separate questions, and they have two separate answers. Here is what the evidence actually shows about each.
Do Fillings Affect MRI Safety And Image Quality?
The short answer is that fillings rarely affect safety and sometimes affect image quality. The reasons come down to what the filling is made of and where it sits in your mouth.
An MRI machine uses a very strong magnetic field. Anything strongly magnetic inside your body can be pulled or twisted by that field. Dental amalgam, which is a mix of silver, tin, copper, and mercury, is not strongly magnetic. Gold and the ceramic or composite materials used in tooth-colored fillings are not strongly magnetic either.
Because of that, the main safety concern with ordinary fillings is low. The metal is held tightly inside a tooth, and it is not ferromagnetic in the way a piece of iron or steel would be.
The image quality issue is different. Even non-magnetic metal can disturb the magnetic field around it. That disturbance shows up on the scan as a bright or dark smudge, sometimes called an artifact. If the artifact lands over the area a doctor needs to see, it can make that part of the image harder to read.
So the practical takeaway is this: your filling is unlikely to hurt you during an MRI, but it may affect how clear the pictures are, especially for scans of the head, face, or neck.
Which Types Of Fillings Interact With MRI Scanners?
Not all fillings behave the same way. The material matters more than most people realize.
Amalgam fillings are the classic silver-colored fillings. They contain metals that can create noticeable artifacts on MRI, particularly on scans of the brain and jaw. They are considered safe in the scanner, but they can distort nearby images.
Composite fillings are the tooth-colored resin fillings. They contain little or no metal, so they usually cause far fewer artifacts. In most cases they are essentially invisible on an MRI.
Gold fillings and crowns can also produce artifacts, similar to amalgam. The size and shape of the metal affects how much distortion appears.
Ceramic and porcelain restorations are generally MRI-friendly. They rarely cause meaningful artifacts.
There is a useful point buried in all this. The artifact is not caused by the filling being magnetic. It is caused by the filling being different from the surrounding tissue in how it responds to the magnetic field. Even a completely safe material can still blur an image.
How Do Fillings Distort MRI Images?
An MRI works by placing your body in a strong, carefully controlled magnetic field. The scanner relies on that field being smooth and even to build a clear picture.
When a piece of metal sits in that field, it changes the field right around it. The change is small, but the scanner is sensitive. The result is a patch of the image that looks warped, bright, or dark instead of showing normal anatomy.
This effect is called a susceptibility artifact. It tends to be worse when:
- The metal is larger or denser
- The metal is closer to the area being scanned
- The scan uses certain techniques that are more sensitive to metal
For a scan of the knee or lower back, a filling in your mouth is far away and usually irrelevant. For a scan of the brain, sinuses, or jaw, a filling can sit right next to the region of interest, and the artifact can matter more.
Can You Get An MRI With Metal Fillings?
Yes, in most cases you can. Metal fillings are not a standard reason to cancel an MRI.
Radiology departments routinely scan people who have amalgam, gold, or composite fillings. The technologist knows how to account for them. In many situations the artifact is small enough that it does not change the diagnosis.
That said, “usually fine” is not the same as “always fine.” The honest position is that the impact depends on what the scan is looking for and where the filling sits. If a doctor needs a very clear view of an area right next to a large filling, the artifact could limit how much the image can show.
This is why you should always tell the MRI staff about any dental work before the scan. It is not because the filling is dangerous. It is because knowing about it helps them interpret the images and, if needed, adjust the scan.
What Should You Tell Your Doctor Or MRI Technologist?
Be upfront about your dental work. It takes a minute and it can save confusion later.
Tell them about:
- Any fillings, especially large or metal ones
- Crowns, bridges, or implants
- Braces, retainers, or permanent retainers
- Any metal plates, screws, or clips anywhere in your body
The last point matters more than the fillings. The most serious MRI safety concerns involve things like certain implanted medical devices, some aneurysm clips, and metal fragments in the eye. Fillings are low on that list. But a full picture of what is inside your body helps the team keep you safe and get the best images possible.
If you are unsure what is in your mouth, your dentist can tell you. Dental records often note the type of material used.
Are There Risks From Fillings During An MRI?
For standard fillings, the safety risk is low. The main documented concerns with MRI and metal involve objects that are strongly magnetic or that can heat up, and ordinary dental fillings generally do not fall into those categories.
The more realistic issue is a practical one. If artifacts blur the area a doctor needs to see, the scan may be less useful. In some cases that could mean repeating the scan with different settings, or using another imaging method like a CT scan.
There is no reliable evidence that a normal filling causes harm simply by being in the scanner. But it is also fair to say that every case is a little different, and the radiology team is the right source for your specific situation.
What If You Need A Clear Scan Of Your Head Or Neck?
If the area of interest is right next to a filling, there are options.
Technologists can sometimes change the scan settings to reduce metal artifacts. Different MRI sequences can be more or less sensitive to metal. In some cases, a different imaging test may give a clearer answer.
This is a decision for your doctor and the radiology team, not something to solve on your own. The key point is that a filling does not automatically block a good scan. It just means the team may need to work around it.
If you have a lot of dental metal and you are scheduled for a brain or sinus MRI, it is reasonable to mention it when you book the appointment. That gives the team time to plan.
Do You Need To Remove Fillings Before An MRI?
No. Removing fillings before an MRI is not standard practice, and it is not recommended just to get a scan.
That would mean drilling out healthy or stable dental work for no safety reason. The artifact from a filling is a technical challenge for the imaging, not a medical danger that requires removal.
If a scan is genuinely limited by artifacts, the answer is usually to adjust the imaging approach, not to remove the filling. Talk with your doctor and the radiology team if you have concerns about whether your dental work will affect a specific scan.
Frequently Asked Questions
Is it safe to have an MRI with metal fillings?
Yes, standard dental fillings are generally considered safe in an MRI scanner because they are not strongly magnetic. The main concern is image distortion, not harm to you.
Do fillings show up on an MRI?
Metal fillings can appear as bright or dark smudges, called artifacts, on the scan. Composite and ceramic fillings usually cause little or no visible distortion.
Can a filling ruin an MRI of the brain?
It can blur part of the image if the filling is close to the area being scanned, but it does not usually make the scan useless. The radiology team can often adjust settings to reduce the effect.
Should I tell the MRI technologist about my fillings?
Yes, you should mention all dental work, including fillings, crowns, and implants, before the scan. It helps the team interpret the images and plan the best approach.

